Disabling SIP ALG

SIP ALG modifies VoIP traffic (packets) and is enabled by default on many routers. When implemented correctly, SIP ALG modifies specific IP addresses in these packets, changing them from your local IP address to your public IP address. Unfortunately, in many routers, it is poorly implemented and, instead of replacing only the specific IP addresses that need to be replaced, it replaces all of them, which then breaks SIP signalling. This poor implementation of SIP ALG can cause several issues, such as:

Calls dropping after a set period of time.
Calls dropping when trying to retrieve the call from hold.
Calls dropping when being transferred.
Calls not being received.
Unable to make outbound calls.
Calls with no audio.
Calls with one-way audio.
Other extensions continue ringing after the call has been answered.

Not all routers offer the option to disable SIP ALG, some of the most popular routers are listed below.

Can Disable SIP ALG	Can Not Disable SIP ALG
Technicolor, Thomson, SpeedTouch	D-Link DIR-655
Draytek	Motorola SBG6580
Netgear	BT Home Hub
Juniper / Netscreen SSG Series	Virgin Media Super Hub
Cisco 800 Series
Linksys WRT610N
Zyxel 660

This list is not extensive, so if your router is not listed here, try typing the make and model of your router, followed by the phrase disable SIP ALG, into Google.

Best Solution: Disable SIP ALG On Router

Some routers offer the option to disable SIP ALG. This is usually done by navigating to the router's IP address, entering the username and password (usually 'admin') on the back of your router, and finding and disabling the SIP ALG option. A few router-specific guides can be found by clicking your router make in the list above.

Alternative Solution: Change VoIP Phone Ports

If your router does not allow you to disable SIP ALG, or you do not have access to your router, the solution is to change the port your VoIP phone uses to 5065. By default the port will be set to 5060; a standard SIP port. By changing this port, likely, packets sent from your phone will not be flagged as SIP packets by your router, and so will not be affected by SIP ALG. To change this port, connect to the phone by entering the phone's IP address into the address bar of a web browser on a computer on the same network as the phone. Specific instructions for various phone models can be found on the Handset Configuration page.

Once you have connected to the phone, you will need to change the following settings on each account that you use on the phone:

Sip Server: sip.voip123.co.uk:5065
Local SIP Port: 5065
Proxy Server Port (If using a proxy): 5065

NB: If you are using multiple accounts on the same phone, ensure that you don't use the same Local SIP Port on multiple accounts. Each account must have a unique Local SIP Port. We recommend using 5065 for the first, 5066 for the second, and so forth.